The motorcycle wheel chock is one of the many bike accessories that go
a long way to ensure maximum bike safety when it is kept in storage or
during its transportation. Well, this motorbike accessory is nothing
but a metal/rubber tool that consists of two plates used in the sides
of the tires of the motorcycle and hence keeps it in place. The plates
can be set for wide tires from 80 to two hundred millimeters, but an
optional set of upper plate, for the tires, which is less than 100 mm
wide, is also recommended.
Purchase the optional plates that represent the brackets "U". Four screws (two on each side would help to keep the pieces in place). The width of these Motorcycle Wheel Chock plates can loosen the nuts on the plate slide in and hence they should be customized to be set using the scale on the front of the ramp to an ideal width. You can use these wheel chocks on both the front or rear tire or either of these as you think fit. They can be installed and when you do not need them, you can rotate these plates for detaching. The motorcycle wheel chock is especially great in the garage or shop for holding the motorbike throughout repair. Read More
Purchase the optional plates that represent the brackets "U". Four screws (two on each side would help to keep the pieces in place). The width of these Motorcycle Wheel Chock plates can loosen the nuts on the plate slide in and hence they should be customized to be set using the scale on the front of the ramp to an ideal width. You can use these wheel chocks on both the front or rear tire or either of these as you think fit. They can be installed and when you do not need them, you can rotate these plates for detaching. The motorcycle wheel chock is especially great in the garage or shop for holding the motorbike throughout repair. Read More
No comments:
Post a Comment